1.4.2 Start Mif2Go

1. Open a document or book in FrameMaker. You should see two additional items on the FrameMaker File menu, as shown in Figure 1-2.

2. Choose File > Set Up Mif2Go Export... (Alt+f > s) to set up your Mif2Go project; see §3.3 Setting up a Mif2Go project.

3. Choose File > Save Using Mif2Go... (Alt+f > m) to start the conversion; see §3.6 Converting documents.

Figure 1-2 FrameMaker File menu with Mif2Go installed

 

Note: Mif2Go hot-key assignments can change, depending on what else is on the File menu.

---

> 1 Getting started with Mif2Go > 1.4 What you need to do > 1.4.2 Start Mif2Go