4.2.7 Skipping the Mif2Go Export and Finished dialogs

Normally you will want to have both the Choose Project dialog and the Export dialog come up when you click File > Save Using Mif2Go..., to give you the chance to change graphics or MIF usage settings before each conversion. To proceed with conversion as soon as you select the right project, you can turn off the Export dialog with the following setting (edit the configuration file to make this change):

[FDK]

; UseInitDialog = Yes (display dialog before conversion) or No

UseInitDialog=No

To eliminate the Finished dialog that announces completion of each Mif2Go conversion, and that requires you to click OK before you can do anything else in FrameMaker:

[FDK]

; UseDoneDialog = Yes (default, display dialog after conversion) or No

UseDoneDialog=No

When UseDoneDialog=No, the Status bar at the bottom of the FrameMaker book or document file shows the message:

Mif2Go project finished

when the conversion is complete.

---

> 4 Setting configuration options > 4.2 Specifying operating settings > 4.2.7 Skipping the Mif2Go Export and Finished dialogs